| Technical Data |
: |
Heavy duty rubber cable |
| Temperature Range |
: |
Flexing : -25 °C to + 80°C |
| |
|
Fixed installation : -40°C to + 80°C |
| Permissible Operating Temperature |
: |
at conductor + 80°C |
| Nominal voltage |
: |
Uo/U 0.6/1 kV |
| Operating voltage |
: |
Three-phase and one-phase a.c Uo/U 0,7/1.2 kV d.c system Uo/U 0.9/1.8 kV |
| Test Voltage |
: |
3000 V |
| Insulation resistance |
: |
min. 20 MOhm x km |
| Tensile strength |
: |
statical load : |
| |
|
total cross-section x 15 N/mm2 |
| Minimum bending radius |
: |
Fixed installation : 4 x cable |
| |
|
Flexing : 10 x cable |
| |
|
without forced operation 15 x cable |
| Cable Construction |
: |
- Tinned copper conductor fine wire stranded to IEC 60228 cl. 5 |
| |
|
- Rubber insulation 3Gl3 |
| |
|
- Green-yellow earth-core for 3-cores and above |
| |
|
- Core identification : one green-yellow earth core and others black |
| |
|
cores with continuous white numbering |
| |
|
- Rubber inner sheath |
| |
|
- Outer jacket. Rubber-compound |
| |
|
- Yellow colour outer jacket |
| |
|
- Behaviour in fire according to IEC 60332-1B |
| Application |
: |
Suited as a connecting cable for very high mechanical stress. Applicable in |
| |
|
underground and surface mining, industrial tools, stone-pits, building sites, |
| |
|
outdoors and indoors. Suitable for fixed installation on plaster, in dry, damp and |
| |
|
wet areas. A long duration of life under extreme operating conditions is |
| |
|
guaranteed. Not suitable for drumming and use in all types of machinery, such as |
| |
|
robots, handling units and energy transfer units where constant mobility is present. |
| |
|
Insulation of a plastic-rubber compound on EPR basis improves the resistance to |
| |
|
ozone in order to avoid the formation of cracks due to ozone and insulation damage |
| |
|
in switch-boards |
| Note |
: |
G = with green-yellow earth core |
| |
|
X = without green-yellow earth core |
